Michael, me too!
I suppose I could trace it tho....I just figured maybe someone had it loose already...electronic copy would be awesome too tho...
| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Anyone have SJ taper profile ? http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=3201 |
Page 1 of 1 |
| Author: | L. Presnall [ Mon Sep 12, 2005 1:19 pm ] |
| Post subject: | |
Say, does anyone have the side taper profile for the OLF SJ? I have the dread and OM stuff that I've done already, but no SJ...I'd like to make an aluminum flashing or hardboard template, but I want to do it with the right profile! TIA. |
|
| Author: | Michael Dale Payne [ Tue Sep 13, 2005 12:03 am ] |
| Post subject: | |
A full scale profile is on the OlF SJ Plan dwg (drawing)....Too many years speaking autocad |
|
| Author: | Tom Dowey [ Tue Sep 13, 2005 1:04 am ] |
| Post subject: | |
Michael, I purchased the OLF SJ Plan and was wondering if there was an electronic copy available? I don't want to cut up my original. |
|
| Author: | L. Presnall [ Tue Sep 13, 2005 1:19 am ] |
| Post subject: | |
Michael, me too! I suppose I could trace it tho....I just figured maybe someone had it loose already...electronic copy would be awesome too tho...
|
|
| Author: | Michael Dale Payne [ Tue Sep 13, 2005 1:39 am ] |
| Post subject: | |
Guys, I hate to be a kermugen. I could provide electronic copies via autocad DWF viewer but you would need a means of printing them on a media 32+" long. I'm guessing that not many of you have that capability. If you do let me know and I will confirm that you bought a copy from the forum and will provide an electronic copy and free-ware software to view and print the drawing via email. Outside of this tracing is probably the best and quickest option or go to your local copiy shop and get a copie run. Any other Ideas? |
|
| Author: | L. Presnall [ Tue Sep 13, 2005 3:50 am ] |
| Post subject: | |
Michael, I can view the dwf, but can't print that long (without taping enough 8 1/2 x 11 sheets together)...so I'd have to go to a copy shop to print anyway...so probably the best thing to do in that light is just to copy my plan and cut that one up...thanks tho for the offer to email a file... |
|
| Author: | Michael Dale Payne [ Tue Sep 13, 2005 4:02 am ] |
| Post subject: | |
No problem. That is the issue with most, that being actualy printing the file at full scale. That is the reason Lance and myself desided not to offer the plans in DWF format as an option from the libarary. It would have been convienent if practical though. You could have gotten your plans in min. of paying and had them on electronic storage and no postage. This how I do my custom labels. Small full scale this works fine on any color printer. |
|
| Author: | CarltonM [ Tue Sep 13, 2005 4:46 am ] |
| Post subject: | |
Be sure to compare the copy shop print with the original before you walk out the door! Lay one over the other. Sometimes they don't come out exactly the same size. |
|
| Author: | L. Presnall [ Tue Sep 13, 2005 4:57 am ] |
| Post subject: | |
|
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|